Telematrix SP200 User Manual

Page 16

Using A Flash When Dialing

To use a Flash when dialing, simply press the

“FLASH” key at the appropriate point in

the number sequence being dialed from the key pad.

Programming Flash Timing into Memory

Flash Timing can be programmed into the Spectrum PLUS

speed dial memory.

This function allows for a timed line break in the sequence of the dialing patterns
when using the speed dial keys. This function may be required for accessing line
features provided by your telephone system or local telephone company. The
flash timing options are 100 through 1000 milliseconds, programmable in 100mS
increments.

To Find the Correct Flash Timing

The f actory d efault F lash T iming is pr o-
grammed at 600mS and is the most com-
monly us ed ti ming o ption. However, the
timing c an be r eprogrammed b etween
100mS to 1000mS, when needed.

1. Check with your local service provider

or PBX provider to select the appropri-
ate timing.

2. If d ifferent t iming is r equired, follow

the Fl ash T ime Pro gramming instruc-
tions on the next page.

NOTE: Each “Flash” counts as 1-digit when stored into a speed dial memory location.