Telematrix SP200 User Manual

Page 18

Programming Pause Timing

A Pause time between 1.0-seconds to 5.0-seconds can be programmed into memory.
This function allows for a de layed ti ming for those systems requiring a di fferent ti me
delay and all ows the us er to de lay the di aling pattern of a number. This function may
be required for a ccessing line f eatures provi ded by te lephone pro vider or l ocal
telephone company. A s peed di al numbe r may nee d t o paus e d uring its di aling
sequence to ensure proper connections.

PROGRAMMING THE PAUSE TIME OPTION

Pause timing can be programmed for different timing options listed below.

1. Lift the Handset from it’s cradle so it is in a off-hook position.
2. Pr ess the

“STORE” key once.

3. Press the “#” key for 3-seconds until an alert sound is heard.
4. Program the pause time into memory by using the keypad. Press the following

keys on the keypad in the order shown for the desired pause time.

For 1.0-second

press "1" "0" then “#”.

For 2.0-seconds

press "2" "0" then “#”.

For 3.6-seconds

press "3" "6" then “#”.

For 4.0-seconds

press "4" "0" then “#”.

For 5.0-seconds

press "5" "0" then “#”.

4. To exit the program mode, place the handset back in the cradle in an on-hook

position.

NOTE: If you require a pause time delay longer than the maximum setting of 5.0S,

stack the pauses within the dialing pattern to achieve the longer timing.

NOTE: The default Pause time is 3.6-seconds.