Buffalo Technology Buffalo AirStation WRB-G54K - Manual (Page 8)

8
◗ The IP Address is Acquired Automatically: Choose this
option IF your ISP uses Automatic IP address assignment. You
will see a message asking you to wait. When you see a new
Menu page appear, click “NEXT” at the bottom right corner of
the screen and your connection to the internet will be tested.
◗ The IP Address is Entered Manually: If your ISP requires
you to manually enter an IP address (static), then click on this
option. Enter the information provided by your ISP into the
appropriate fi elds, then click “NEXT” at the bottom right hand
corner of the screen and your information will be stored. Click
NEXT again to test your connection to the internet.
◗ PPPoE Connection: IF your ISP requires PPPoE (Point to
Point Protocol over Ethernet) then click-on this option. Enter
the appropriate PPPoE information and then click “NEXT”.
Once the information updates, you should click “NEXT” again
and your connection to the internet will be tested.
FOR CABLE Broadband Service:
Click on the CATV button ➲ the Cable Setup Screen will appear.