Setting up the router wbr-g54 – Buffalo Technology Buffalo AirStation WRB-G54K User Manual

Page 3

Text mode
Original mode

Setting up the Router WBR-G54

■

Note: You can use either a Wired or Wireless connection from the PC

you are using to setup your router. It is strongly recommended you
use the Wired method to avoid possible errors or connection issues
during the initial setup.

STEP 1. Connecting cables (Refer to Figure 1):

◗

Ensure your Cable or DSL modem, Wireless Router, and the

computer you will be using to setup the Router, are powered
off prior to connecting cables.

◗

Locate your DSL or Cable Modem LAN cable and connect it

to the appropriate port on your Modem as per instructions from
your Modem’s manufacturer.

◗

Connect the other end of this cable to the port marked WAN on

the back of the Router.

Figure 1: Connecting Cables