Buffalo Technology Buffalo AirStation WRB-G54K - Manual (Page 17)

17
◗ Check Signal Strength and speed indications. If the signal is
poor, you will have to adjust the position of the repeater, router,
and/or your client computer. Some experimentation will be
required to achieve desired results.
■ NOTE: Alternatively, to use your repeater to avoid obstructions
between the router and the client computer, position your repeater so
that there is a clear line of sight between the repeater and the router and
a clear line of sight between the repeater and client computer, check
signal strength as outlined above.
***IMPORTANT*** Certain Line of site obstructions between your router
and repeater or between repeater and your PC can decrease signal
strength.
Check Signal Strength: