Buffalo Technology Buffalo AirStation WRB-G54K - Manual (Page 15)

15
B. Placing Wireless Repeater manually when no portable
computer is available.
◗ Ensure your Wireless Router is on and confi gured properly and
that your Wireless Client computer is confi gured to connect to
the router.
◗ Position your Wireless Repeater no more than about 65 feet
from the router. Your client computer should be approximately
65 feet or less from where you place the repeater (See Figure
3 for general repeater placement).
■ NOTE: The ranges given in the above step are estimates only, the
actual optimal distance can vary greatly depending on obstructions and
RF interference.
◗ Attach provided power adapter to the DC-IN connector on the
back of the repeater and plug the other end to a convenient
wall outlet.
Windows XP users (Using Windows XP wireless Zero
Confi guration Services)
■ NOTE: Consult your XP documentation for proper confi guration of
Windows XP Wireless Zero Confi guration Services.
◗ Locate the Wireless connection indicator in your computers
“tray”, usually at the bottom right hand corner of your screen
on the taskbar.
◗ Double Click on this icon to bring
up the Wireless Status screen.
Note Signal Strength and speed
◗ Skip to section “Check Signal
Strength”