Talos Security DC1080FIR24 HD-SDI - Manual (Page 6)

6
Menu items can be adjusted by using the OSD buttons on the camera. During the camera
operation, status information can be displayed on the screen.
A OSD button is placed near the camera module for navigating and changing the menu setting.
In order to enter the main menu, press the OSD button.
To choose the sub-menus, please move the button to UP or DOWN position.
If the icon of each symbol is present, enter particular sub-menu by pressing the OSD button.
To change the parameters, push the button to LEFT or RIGHT. In order to leave the menu, select
EXIT and press RETURN.
In order to enter the main menu, press the OSD button. The following main menu is displayed on
the screen.
Set Up
EXPOSURE
LENS submenu
EXPOSURE
B A
OSD Set-up
HBLC / D-WDR
AGC
3D DNR
SENS-UP
RETURN
LOW
X16
MID
LENS ELC
OFF
1. EXPOSURE
This submenu allows for choosing and changing the settings of the parameters connected
with AE and controlling the iris.
1-1. LENS
A. ELC : Manual settings of the lens operation mode.
B. DC : Automatic lens mode.
E.SHUTTER : Selection of shutter mode. Selection of shutter mode in the range X2~X1024,
Auto, 1/50~1/100,000.
BRIGHT : Sets brightness level in the range from 0 to 255.
DC REF(DC) : Sets DC LENS level in the range from 0 to 255.
RETURN : Pressing RETURN moves to a higher-level menu.
BRIGHT
REUTURN
E.SHUTTER
LENS-ELC
AUTO
030 --l--- BRIGHT
DC REF
E.SHUTTER
LENS-DC
AUTO
030 --l---
030 --l---
REUTURN