Talos Security DK1400 Series Surveillance Kit User Manual User Manual
Page 31
31
4.1.2.2 Common Setup Tab
Under server manage click on "Add" to enter the Add Server settings interface.
Server Type: Click to choose the DVR server type; select 37DVR.
Address: Enter the IP address of the DVR from the network setup menu.
Local Name: Assign a name to easily recognize a DVR if you have more than one.
CMD Port: Enter the port number used on your router to stream video from the DVR.
Stream Type: Select Main Stream.
Enable Auto Logon: Click to allow NVClient to log into the DVR.
Channel Num: Select the active number of channels in the DVR.
User Name: Enter the user name used to log into the DVR.
Password: Enter the password used to log into the DVR.
4.1.2.3 Setup Ex Tab
Enable Sync Time On Server Open: Check
On Start App, Auto Open Server: Check
On Check Camera: Select "Open Image at Free Position"
On Open Server: "Select Auto Open Camera"
Enable Back Connect: Check
Listen Port: Enter the port number used on your router to stream video from the DVR.
Click "Apply and then "OK" to return to the DVR live view.