Talos Security DR1600 Series DVR User Manual User Manual
Page 15
15
CHANNEL: Click to select all channels or just one channel for schedule recording.
WEEKLY: Setup each channel as desired, there are three modes; ALARM, NORMAL, NO REC, the
selected mode will display a "check mark". You can copy a daily setting to other days. Different
colors indicate different record mode: Red for alarm record, green for normal record, blank for no
record.
Click APPLY then Enter to save new settings.
3.4.2.3 NETWORK SETUP
Click the "NETWORK" to enter network settings interface.
TYPE: Two options; DHCP and Static IP address.
STATIC
TYPE: Select "Static" to set your preferred DVR IP address on your network.
PORT: This is the out-bound port for video transmission.
WEB PORT: This is the in-bound contact port for HTTP.
IP ADDRESS: Set an IP address and press "Enter". Address should not conflict with automatically
assigned addresses (DHCP) from the router.
NETMASK: Enter the Netmask settings; this is normally a default setting.
GATEWAY: Enter the Gateway settings; this is the address of your router on your network.