Regency Horizon HZO42 Outdoor Gas Fireplace - Manual (Page 29)

Regency Horizon™ HZO42 Gas Fireplace
29
INSTALLATION
12) LIne up screw holes on (E) (header) and (B) (inner vertical
support). Secure with 2 wafer screws on each side (4 total)
as shown below. This will now be the front of the frame.
14) Line screw holes on 1 (F) (corner brace) with (B) + (A) and
secure with 4 wafer screws. as shown below.
15) Repeat step 14 for opposite corner as shown below.
16) Install vertical back support to back of assembly with 2
screws at top and bottom in locations shown below.
13) On the back side of the frame. Install both (F) pieces (corner
brace) on opposite corners.
Important: (F) parts must be installed opposite from one
another for rigidity as shown below.
(A)
(B)
(F)
(D)
(B)
(F)
(E)
(F) corner brackets
positioned in opposite corners
Note: Confi rm assembly is level and square before
proceeding with further materials.