Regency Horizon HZO42 Outdoor Gas Fireplace - Manual (Page 24)

24
Regency Horizon™ HZO42 Gas Fireplace
INSTALLATION
FACEPLATE INSTALLATION
Remove the protective coating from the faceplate before installation - see
handling instructions in panel install section.
1) To install the faceplate - line up the tabs on the faceplate with the 'C'
shaped openings on the left and right sides of the unit. There are 3
slots on each tab so the faceplate to accommodate different fi nishing
materials.
2) Install logo onto faceplate.
4) To remove - reverse steps.
3) For installations where thicker fi nishing material is used - the optional
trim piece may be installed to fi ll the gap.
Install the trim between the bottom access panel and the faceplate as
shown below.
Trim Piece
Final Install