Summit DW18 Installation Manual - Manual (Page 9)

6
USA
6. ENCLOSURE PREPARATION
6.1 ELECTRICAL PREPARATION
WARNING
The dishwasher is designed for an electrical supply of 120 V, 60 Hz, AC, connected to a
dishwasher-dedicated, properly grounded electrical circuit with a fuse or breaker rated
for 15 amperes.
6.2 PREPARATION FOR INSTALLING MOUNTING BRACKETS
A
A
WARNING
Dishwasher must be secured to adjacent
cabinetry using the mounting brackets
provided. Failure to do this may cause
damage to property or bodily injury.
B
B
Place the two mounting brackets into the
top corners of the dishwasher.
Bend sides of mounting brackets ( A) in
order to fix from sides (if necessary).
Notice :
• For these model, DWS 54100 FBI
note that extra bending should be
done on the brackets as shown.
?
6.3 ADJUSTING HEIGHT
Measure the height of the
enclosure.