Installer checklist, Final instructions, Self help hints – Summit DW18 Installation Manual User Manual
Page 24
![background image](/manuals/573589/24/background.png)
21
USA
8. INSTALLER CHECKLIST
Your installer must have completed and
checked the following:
•
The dishwasher is square and
level.
•
The dishwasher is fastened
securely to the cabinetry.
•
The dishwasher door opens and
closes freely. The dishwasher
door must close without hitting any
cabinetry or counter top.
•
The inlet water supply is turned on
and checked for leaks.
•
The drain hose has been
connected and checked for
leaks. There must be no kinks or
obstructions in the drain hose.
•
The drain hose must be installed
with a 28" (710mm) high drain
loop for drain hook-ups without
any air removed.
•
If the dishwasher drain is hooked
up to a garbage disposal, the drain
hopper plug must be removed.
•
The spray arms are free and
rotate freely.
•
The rinse cycle has been run.
•
The water level will be below the
filter screen after the end of the
wash program. It is normal to find
some water in the drain filter area.
9. FINAL INSTRUCTIONS
1. Press the On/Off button to turn the
dishwasher on.
2. Power indicator light comes on.
3. Use the Program Select button to choose
a washing program.
4. Start the program with the Start/Pause/
Cancel button.
5. Run the dishwasher through one
complete cycle. When the wash cycle is
completed, use the On/Off button to turn
the dishwasher off.
Notice :
If the dishwasher does not operate
properly, refer to the self help hints.
10. SELF HELP HINTS:
The screen does not come on:
•
Check to make sure the breaker
to the dishwasher is in the on
position.
•
Check to make sure that the
Supply cord is plugged.
No Water is coming into the dishwasher:
•
Check to make sure the hot water
shut-off is in the ON position.
Water does not drain:
•
Make sure drain hose is not kinked
or comes out of air gap next to the
sink.
•
Remove drain hose from disposal
making sure plug is removed.
Notice :
•
If your dishwasher is not operating
properly after following these
steps: Contact your dealer to
schedule an authorized service
agent to inspect your new
dishwasher for any function
related failure.
•
The manufacturer warranty does
not cover installation, conversion
or customer education service
visits.
You will find the model and serial number
information on the label located on the
right-hand side of the inner door of your
dishwasher, as shown above.
Notice :
Please make a copy of your invoice and
keep it with this manual and register your
dishwasher on-line.