Summit DW18 Installation Manual User Manual
Page 21
18
USA
C
Ø 3/16" (4mm)
y
x4
A
B
Ø 3/16" (4mm)
y
x4
C
7. Open the door and remove the two caps and two
screws inside the door at position 1 and 3 (Figure
C
).
8. Using the four screws Ø 3/16” x 111/16” (Ø 4mm
x 43mm) provided, attach the wooden door to the
dishwasher at position 1 and 3 (Figure
A
).
9. Check the position of the wooden door and make
sure it is aligned properly (Figure
B
).
10. Tighten the screws in position 1 and 3 completely
after the final alignment (Figure
C
).
This manual is related to the following products: