Utility stitches, Straight stitches – Brother PE 300S User Manual
Page 39
36
Utility Stitches
STRAIGHT STITCHES
1
Straight (Left)
2
Straight (Middle)
UTILITY STITCHES
1
2
J
1. Attach the J foot. Handle thread and fabric with your left hand
while turning the balance wheel with the right. Pierce the nee-
dle through the fabric as shown.
3
5
3
5
4. Raise the presser foot, remove the fabric and cut the thread.
2. Lower the presser foot. While pressing the reverse stitch but-
ton, sew 3-4 stitches in reverse to make a reinforcement stitch.
Then release the “REVERSE STITCH” button and press the
“START/STOP” button to begin sewing.
1
Reinforcement stitch (3-4 stitches)
3. At the end of a seam, press the “REVERSE STITCH” button
again to sew another reinforcement stitch.
*
Reverse stitches are sewn while the “REVERSE STITCH”
button is pressed.
*
Sewing in reverse is carried out at a slow sewing speed.
1