SATEC EDL175 - Manual (Page 5)

5
NOTE: Connections for relays, status inputs and communications are the same as for the PM175. See the
PM175 Installation and Operation Manual for connection drawings and instructions. Analog output is not
connected.
Figure 1-2 Detail of Nos. 2,3 and 16 in Figure 1-1 Figure 1-3 Detail of No. 12 in Figure 1-1
Figure 1-1 Standard Contents of EDL175
1 EDL175 Display
2 PM175 Status Inputs Connector - see Figure 1-2 for detail
3 PM175 Relays Connector - see Figure 1-2 for detail
4 Communication Port (RS-232)
5 Low battery LED “BAT LOW” (red, blinking) and Buzzer
6 AC Power LED (green)
7 Battery LED “BAT” (red)
8 Slide switch operating voltage supply
9 Battery and Battery Fuse
10 Battery Voltage measurement sockets
11 Voltage inputs
12 Current Terminals
13 Current Inputs
14 Power Supply Socket & Fuse Housing
15 Network neon light
16 PM175 Analog I/O (Option)