SATEC EDL175 - Manual (Page 2)

2
LIMITED WARRANTY
The manufacturer offers the customer a 24-month functional warranty on the instrument for faulty workmanship or
parts from date of dispatch from the distributor. In all cases, this warranty is valid for 36 months from the date of
production. This warranty is on a return to factory basis. The manufacturer does not accept liability for any
damage caused by instrument malfunction. The manufacturer accepts no responsibility for the suitability of the
instrument to the application for which it was purchased. Failure to install, setup or operate the instrument
according to the instructions herein will void the warranty. Your instrument may be opened only by a duly
authorized representative of the manufacturer. The unit should only be opened in a fully anti-static environment.
Failure to do so may damage the electronic components and will void the warranty.
NOTE
The greatest care has been taken to manufacture and calibrate your instrument. However, these instructions do
not cover all possible contingencies that may arise during installation, operation or maintenance, and not all
details and variations of this equipment are covered by these instructions. For additional information regarding
installation, operation or maintenance of this instrument, contact the manufacturer or your local representative or
distributor.
This manual provides instructions for using the EDL175. For instructions and information on using the PM175,
refer to the PM175 Installation and Operation Manual; for instructions and information on using the PAS software
package, refer to the PAS User's Manual included in the accompanying CD for the PM175 Series.
BG0447 REV. A1