RKI Instruments Pioneer 16R - Manual (Page 21)

1. Press and hold down the reset switch to enter the program.
2. When the SELF CHECK screen appears on the display screen, release the reset switch. The
Pioneer performs the self check procedure and returns to the normal screen. This process takes
approximately 5 seconds.
• To reset Minimum/Maximum readings:
If you reset the minimum and maximum readings, you cannot retrieve the minimum and maximum
readings previously stored by the Pioneer.
1.
Press and hold down the reset switch to enter the program.
2. When the RESET MIN/MAX screen appears on the display screen, release the reset switch.
3. The message “MIN/MAX RESET DONE” appears on the display screen, then the program returns
to the normal screen.
N O T E : See the detections insert(s) for a description of the Channel Setup Program.
Pioneer-R16 Operator’s Manual Operation 20