RKI Instruments SM-2003U - Manual (Page 32)

32 • Charging an Instrument in a Calibration Station
4. If the battery pack is fully charged, then the CHARGE status LED
will turn solid green in a few minutes.
If the battery pack is drained enough for the calibration station to
charge it, the CHARGE status LED will continue to blink yellow
while charging is taking place. Both the GX-2001 and GX-2003 will
take approximately 90 minutes to fully charge.
5. When the charge is complete, the CHARGE status LED will turn
solid green.
To recharge the batteries in an instrument without performing any other
operations:
1. Place the instrument in the calibration station. If no bump test or
calibration will be performed, it is not necessary to make any tubing
connections to the instrument.
2. Turn on the calibration station using the power switch on the back.
3. The CHARGE status LED on the right front of the calibration station
will begin to blink green for a few seconds, then blink yellow.
4. If the battery pack is fully charged, then the blinking yellow LED will
turn solid green in a few minutes.
If the battery pack is drained enough for the module to charge it,
the CHARGE status LED will continue to blink yellow while
charging is taking place. Both the GX-2001 and GX-2003 will take
approximately 90 minutes to fully charge.
5. When the charge is complete, the CHARGE status LED will turn
solid green.