Retsch RS 200 - Manual (Page 24)

15.11.2006

Retsch GmbH
24
Doc. Nr. D 98.725.9998
Contrast / Brightness
MENU DISPLAY CONTRAST
BRIGHTNESS
Contrast and brightness can be adapted to each user or to the environment (sunlight, dazzling etc).
If you have accidentally selected the wrong contrast or brightness (the display can no longer be seen), switch
off the unit at the main switch, keep the buttons START, STOP and LID OPEN pressed simultaneously and
switch on again. You are now in the language selection and the setting values CONTRAST and BRIGHTNESS
have the works presettings again.
Date / Time
MENU DATE
TIME
The actual date and time can be entered here.
The time then appears in the stand-by monitor.
The unit can be disconnected from the mains for up to 30 days without the settings being lost.
Stand-by monitor
After 15 minutes inactivity of the unit (times after a STOP command) the stand-by monitor switches on
automatically.
By pressing one of the buttons, or touching the setting knob, the stand-by monitor disappears without carrying
out the command which has been made.
If you were in a sub-menu when the stand-by monitor was activated, you return to this selection window
automatically.
The stand-by monitor cannot be set and cannot therefore be switched off.