Retsch PM 200 - Manual (Page 11)


Retsch GmbH
11
Transport and assembly
Packaging
The packaging has been adapted to the mode of transport.
It corresponds to the generally applicable packaging
guidelines.
Please retain the packaging for the duration of the
warranty since, in case of complaint, returning in
unsuitable packaging can jeopardize your warranty
claims.
Transport
During transportation, do not subject the PM100/PM200
to impacts, jolts or vibrations. The electronic and
mechanical components could otherwise be damaged.
Temperature fluctuations
In case of wide temperature fluctuations (during
shipment by air, for instance), protect the
PM100/PM200 from condensation. The electronic
components could otherwise be damaged.
Intermediate storage
Likewise for intermediate storage, ensure that the
PM100/PM200 are stored in a dry place.
Assembly
If the device is transported with a forklifter or lift truck, it must
be placed on the transport pallet.
4 people are required to carry the device.
Only place the PM100 or PM200 on a stable laboratory bench, as
they might otherwise be subjected to disagreeable vibrations.
The table base must be clean and skid-resistant.
The net weight of the PM100 is approx. 86 kg
The net weight of the PM200 is approx. 80 kg