Retsch Emax - Manual (Page 55)

Cleaning, wear and service
55
8 Cleaning, wear and service
8.1 Cleaning
WARNING
Risk of a fatal electric shock
- An electric shock can cause injuries in the form of burns and cardiac
arrhythmia, respiratory arrest or cardiac arrest.
• Do not clean the blender under running water. Use only a cloth dampened
with water.
• Disconnect the power supply plug before cleaning the blender.
Cleaning
Check at regular intervals whether water or grease are escaping in or beneath the
device.
8.2 Wear
The grinding tools may become worn, depending on the frequency of the grinding
operation and the sample material. The grinding jars and the balls should be
regularly checked for wear and replaced if necessary.
Check the seals regularly for wear and replace them where necessary.
8.3 Wearing parts
CAUTION
Personal injury
Incorrect repairs
–
This operating manual does not include instructions for repair.
• For your own safety repairs should be carried out only by Retsch
GmbH or an authorised representative (service technicians).
8.4 Service
The grinding tools may become worn, depending on the frequency of the grinding
operation and the sample material. The grinding jars and the balls should be
regularly checked for wear and replaced if necessary.