Precisionsound Multimonica II User Manual

Page 5

Modulation Page

On the second page of the GUI, named “Modulation”, you can add variations to the sound. From left to

right, the controls are:

Pitch Bend

Range: sets the distance in semitones by which the pitch bend wheel on your MIDI controller bends the

pitch of played notes. The maximum available bend is 12 semitones.

Velocity

Depth: sets the relationship between how hard you strike the keys (MIDI velocity) and the volume of the

sound. At 0%, the volume of the sound is unaffected by how hard you play. At 100%, the volume of the

sound is strongly affected by how hard you play.

LFO

The LFO is a sine-shaped low frequency oscillator that can be assigned simultaneously to vary the

volume, pan position, pitch, and filter cutoff of the sound.

Depth: sets the overall intensity of the LFO prior to its assignment to volume, pan, pitch, and filter.



Raising the modulation wheel (CC1) on your MIDI controller increases the LFO depth from its
current value to the maximum depth.

Speed: sets the speed of the LFO cycle, from 1Hz to 14Hz.

Volume: sets the extent to which the LFO varies the volume of the sound, as a proportion of the overall

LFO intensity set by the Depth dial.

Pan: sets the extent to which the LFO varies the position of the sound in the stereo field, as a proportion

of the overall LFO intensity set by the Depth dial.