Powertrax No-Slip Traction System User Manual - Manual (Page 7)

4
Note: There are many different models of the Powertrax No-Slip Traction System and
each model is designed to fit a particular make and type of differential. On the front of
the box there is a label that identifies the specific type of differential it will fit. Because
vehicles are manufactured using different differentials, it is important that you check to
be sure you have the correct Powertrax No-Slip Traction System model before beginning
the installation. If you are unsure, your dealership or independent mechanic should be
able to help confirm the exact differential in your vehicle, or call Powertrax for application
assistance.
The Powertrax No-Slip Traction System is designed to be compatible with your vehicle’s
systems including Anti-lock Brake Systems (ABS). It works at all vehicle speeds and turning
radii, is transparent to your differential’s specific gear ratio, and uses standard differential
lubricant recommended by the manufacturer of your vehicle. No additives are necessary
and no special maintenance is required.
Gas mileage with the Powertrax No-Slip Traction System is also attractive. It improves
when the Powertrax No-Slip Traction System upgrades a “limited-slip” differential, and re-
mains virtually unchanged upon upgrading an “open” 2-wheel drive vehicle to achieve the
traction of a 4-wheel drive vehicle, they avoid the maintenance costs of 4x4 ownership,
save with lower insurance rates and enjoy significantly better gas mileage.