Pavement Ends 41428 Cargo Cover - Manual (Page 2)

41428 pg 2 1110 Rev. A
Parts List
Step One
I NSTALL C ARGO C OVER
Make sure your Cargo Cover is installed
on the vehicle and the seat belts are
tucked into the collars.
Fold down the rear seat and slide the front
seats all the way forward.
Step Three
S ECURE C ENTER S TRAPS
Locate the two (2) long straps in the center of
the Cargo Cover Extension. Wrap them under
the seat brackets. Thread the end of each strap
through the buckle and tighten.
Step Two
I NSTALL E XTENSION ON C ARGO C OVER
Orient the Cargo Cover Extension with the straps toward the
front. Slide the plastic hook on the rear of the Extension onto
the plastic hook on the front of the Cargo Cover, centering the
Extension.
Cargo Cover Extension Qty - 1
Acorn Locknut, Part Number 427.11 Qty - 3
Snap Head Screw, Part Number 200.49 Qty - 3
Step Four
I NSTALL S IDE S TRAPS
Locate the outside straps, one (1) on each front
corner of the Cargo Cover Extension. Slip each
strap between the seat belt and the front pillar.
Hook the end of the strap to the front pillar so that
the hook is level with the Cargo Cover Extension.
Pull the end of the strap to tighten.
Tools Needed
Phillips Screwdriver
Chalk Safety Glasses
Cargo Cover
Cargo Cover
Extension
Thread Strap under
Seat Bracket
Cargo Cover
Extension
Thread Strap
through Buckle
Cargo Cover
Extension
Strap must be
behind Seat Belt
Hook to
Pillar
Pull Strap
to tighten