Pavement Ends 41826 Cargo Cover - Manual (Page 3)

41826 pg 3 0509 Rev. A
Step Four
I NSTALL T AILGATE B AR
From the back of the vehicle, hold the Cargo
Cover with the backing side toward you. Slide
the tubing into the channel in the Tailgate Re-
tainer and install the retainer into the Tailgate
Retainer Mount.
Fabric
Tubing
Cargo Cover - Backing
Side Out
Detail of Tailgate Retainer
Tailgate
Retainer
Channel
Web Strap Buckle
Front Sport
Bar
Threading Strap
through Buckle
Buckle
Step Five
S ECURE W EB S TRAPS
Drape the fabric forward over the rear of the
vehicle and locate the web straps, with buckles
attached, on the front of the Cargo Cover. Wrap
the straps around the front sport bars and thread
the ends loosely through the buckles. Do not pull
the straps tight at this time.
Strap
Step Six
S ECURE P LASTIC S TRIPS
Locate the plastic strip sewn to the Cargo
Cover along each side of the vehicle. Start at
one end on each side and roll the plastic strip
into the Side Retainers.
Fabric
Side Retainer
Plastic Strip
Plastic Strip
Roll Plastic
Strip into
Side Retainer
Detail of Plastic Strip