Pavement Ends 41423 Cab Curtain - Manual (Page 4)

41423 pg 4 0907 Rev. A
Step Six - Optional
Pull up on the front, reinforced edge of
the Cargo Cover and mark the locations
matching the three snaps on the Cab
Curtain fl ap, on the webbing along the
top of the Cargo Cover.
Snaps - on underside of fl ap
Install Studs on Webbing
Reinforced Front Edge of
Cargo Cover
Step Seven - Optional
At the marked locations, push the sharp
end of a Snap Head Screw through the
Cargo Cover from the webbing side, to
make a hole. Once a hole is formed, pull
the screw back out of the hole. Then push
the screw through the hole from the vinyl
side so that the snap is on top of the vinyl.
Thread an Acorn Locknut over the pointed
end of the Snap Head Screw. Snap
the Cargo Cover and the Cab Curtain
together with the three snaps.
Cargo Cover Fabric -
Backing Up
Webbing Push Snap Head Screw
through to form a hole
Cargo Cover
Fabric - Vinyl Up
Acorn Locknut
Snap Head
Screw
If You Have a New Cargo Cover on Your Vehicle*
* If you do not have a Cargo Cover, save the three (3) snaps and nuts for possible future use.