BT 4010 Executive - Manual (Page 57)

Diverse 4010 Executive ~ 9th Edition ~ 17th July ~ 3662
Handset does not ring. The handset ringer may be Hold down
✱
to switch the ringer
switched off. back on.
You cannot dial external numbers. Call barring may be set. Switch off call barring (see page 46).
Your cannot hear your caller. The LEFT navigation button has Press to switch the
been pressed and the microphone microphone back on.
is muted.
The incoming caller’s number is The caller’s number has been Caller has to allow their number to
not displayed even though you withheld. be sent.
have Caller Display.
You cannot hear the ringer or You have changed the telephone Check that the cord has the correct
dialling tone. line cord on your Diverse base. 3-4 pin assignment of the telephone
leads/EURO CTR37.
You keep hearing the error beep You have pressed the wrong Check the prompts in the display
(a descending tone) button in a sequence. or refer to instructions in the
user guide.
55
HELP