BT 4010 Executive - Manual (Page 36)

Diverse 4010 Executive ~ 9th Edition ~ 17th July ~ 3662
Press and hold down the
1 button.
When set up it will take you into
your message service. If during
the set up you entered your
security PIN as well as the
telephone number you will be
taken quickly into your
messages. If the security PIN
was not included you will have
to enter this number now.
Press the OK button.
You will be taken into your
messages.
Press the RED PHONE button
until you reach the idle display.
Note
If you store your security PIN as part
of the quick access number, anyone
with access to the handset will be able
to retrieve your messages.
Note
If your handset is registered to an
answering machine base i.e. Diverse
4016 you will be given the choice of
accessing your answering machine
messages or Network Messaging
Service. See your Diverse 4016 user
guide for further information.
To retrieve messages from
your Voice Mail service
e.g.. 000000 #
Enter your PIN followed by a
hash.
The entire number should
look like this:
7000P1234nP000000n
Press the RED PHONE button
until you reach the idle display.
1
OK
Alarm clock and
appointments
To set the alarm clock
You can use your handset as
an alarm clock. The alarm rings
every day at the time set. When
you have set a time for the
alarm, the display shows
.
The original setting uses the
12 hour clock. If am or pm is
displayed, the 12 hour clock is
set. To switch between the 24
hour and 12 hour clocks see
page 13
Press the Menu options button.
Press the DOWN navigation
button until the display shows
Calendar/Clock .
Press the OK options button.
Press the DOWN navigation
button until the display shows
Alarm Clock .
Menu
OK
34
ADDITIONAL
FEA
TURES