BT 4010 Executive - Manual (Page 46)

Diverse 4010 Executive ~ 9th Edition ~ 17th July ~ 3662
To switch auto talk on or off
When you receive a call, you
can answer it simply by lifting
the handset off the base station.
This is called auto-talk. When
you switch auto-talk off, you
answer all calls by pressing
the GREEN PHONE button.
Press the Menu options button.
Press the DOWN navigation
button until the display shows
H/Set Settings .
Press the OK options button.
Press the DOWN navigation
button until the display shows
Auto Answer .
Press the OK options button.
A
✔
indicates auto talk is
switched on. Press the OK
options button again to switch
auto-talk off.
Press the RED PHONE button
until you reach the idle display.
To reset a handset
You can restore a handset to
its factory settings.
Registration, the Directory
and the Calls list are not
affected.
Press the Menu options button.
Press the DOWN navigation
button until the display shows
H/Set Settings .
Press the OK options button.
Press the DOWN navigation
button until the display shows
Reset Handset .
Press the OK options button.
Press the Yes options button
to confirm reset.
The settings after a reset will be:
Ringer volume 3
Ringer melody 1
Auto talk On
Battery low beep On
Room monitor level 5
Room monitor level high
Time control off
Display language English
Redial list deleted
Press the RED PHONE button
until you reach the idle display.
Menu
Menu
OK
OK
OK
Yes
OK
44
HANDSET
SETTINGS