Orbit Baby Infant Car Seat G2 and Base G2 User Manual

Page 33

Securing Y

our Child

Securing Y

our Child

Positioning the shoulder strap height:

Place your child in the car seat and
determine which pair of shoulder strap
slots are below the child’s shoulders
(Photo B).

Shoulder Straps MUST be below the top of
your child’s shoulders (Figure C). Shoulder
straps positioned in slots above the
shoulders will not hold your child securely
in a sudden stop or crash.

Adjusting the shoulder straps:

The shoulder straps can be adjusted using
the adjuster strap lock. It is located under
the upholstery opening at the front of the
car seat.

Sizing the Restraint Harness to Your Child
cont’d

1. To loosen shoulder straps, press down

on the adjuster strap lock and pull on
both shoulder straps (Photo D).

2. To tighten the shoulder straps, pull on

the adjuster strap that hangs from the
front of the car seat (Photo E).

Changing shoulder strap slots:

1. Loosen the restraint harness by

pressing the adjuster strap lock and
pulling on the shoulder straps (Photo D).

2. Un-zip the rear zippered panel of the

car seat and pull the panel up. Pull on
the restraint harness to pull the two
splitter plates up, along with the two
shoulder straps (Photo F).

3. Unhook each shoulder strap loop from

its metal splitter plate (Photo G).

4. From the front of the car seat, pull the

shoulder straps out from their slots
(Photo H). Re-thread each shoulder