Multiquip DCA70SSJU3 - Manual (Page 46)

PAGE 46 — DCA-70SSJU3 (60 HZ) — OPERATION AND PARTS MANUAL — REV. #0 (05/10/06)
DCA-70SSJU3 (60 Hz) — TRAILER MAINTENANCE
Lug Nut Torque Requirements
It is extremely important to apply and maintain proper wheel
mounting torque on the trailer. Be sure to use only the
fasteners matched to the cone angle of the wheel. Proper
procedure for attachment of the wheels is as follows:
1. Start all wheel lug nuts by hand.
2. Torque all lug nuts in sequence (see Figure 59). DO NOT
torque the wheel lug nuts all the way down. Tighten each
lug nut in 3 separate passes as defined by Table 18.
3. After first road use, retorque all lug nuts in sequence.
Check all wheel lug nuts periodically.
NEVER use an pneumatic air
gun to tighten wheel lug nuts.
Figure 59. Wheel Lug Nuts
Tightening Sequence
NOTE
s t n e m e r i u q e R e u q r o T e r i T . 8 1 e l b a T
e z i S l e e h W s s a P t s r i F
S B L - T F
s s a P d n o c e S
S B L - T F
s s a P d r i h T
S B L - T F
" 2 1 5 2 - 0 2 0 4 - 5 3 5 6 - 0 5
" 3 1 5 2 - 0 2 0 4 - 5 3 5 6 - 0 5
" 4 1 5 2 - 0 2 0 6 - 0 5 0 2 1 - 0 9
" 5 1 5 2 - 0 2 0 6 - 0 5 0 2 1 - 0 9
" 6 1 5 2 - 0 2 0 6 - 0 5 0 2 1 - 0 9