Multiquip MB25HD - Manual (Page 8)

page 8 — MB25hd reBar BeNder • operaTioN aNd parTs MaNual — rev. #0 (04/05/10)
General infOrMatiOn
geNeral iNForMaTioN
The MQ MB25hD Rebar Bender is designed to be used
as a portable on-site rebar bender, capable of bending
in-place rebar to approved American Concrete Institute
(ACI) radius. Labor time and injuries are greatly reduced
from manually bending rebar. The MB25HD is capable of
bends up to 180°.
The MB25HD comes standard with 3 rollers and 5 collars
which can be used in different combinations to match the
diameter of the rebar to be bent.
The MB25HD comes with a foot switch which can start
the bending procedure with a push of the pedal instead of
pressing the start button.
An emergency button is available to immediately stop the
machine when something goes wrong during bending. The
roller then returns to the starting position.