Multiquip HHXG5 - Manual (Page 6)

page 6 — HHXg5 RIDe-ON TROWeL • OpeRaTION maNuaL — Rev. #1 (10/25/10)
traininG cHeckliSt
TRaININg CHeCKLIST
This checklist will lists some of the minimum requirements for machine maintenance and operation. Please feel free to
detach it and make copies. Use this checklist whenever a new operator is to be trained or it can be used as a review for
more experienced operators.
Training Checklist
No, Description OK? Date
1
Read operation manual
completely.
2
Machine layout, location of
components, checking of engine
and hydraulic oil levels.
3 Fuel system, refueling procedure.
4 Operation of spray and lights.
5
Operation of controls (machine
not running).
6
Safety controls, safety stop switch
operation.
7 Emergency stop procedures.
8
Startup of machine, pre-heat,
engine choke.
9 Maintaining a hover.
10 Maneuvering.
11 Pitching.
12 Matching blade pitch. Twin-Pitch™
13 Concrete fi nishing techniques.
14 Shutdown of machine.
15 Lifting of machine (lift loops).
16 Machine transport and storage.