MTS Multipurpose Getting Started - Manual (Page 6)

1.1.0 Getting Started in Simulation
This guide gets you started using MTS TestSuite software by running an example test in simulation mode.
This allows you to familiarize yourself with the software without applying power to your test station.
Installation of the simulation software consists of launching two separate self-extracting executables, one for
the MTS TestSuite software and one for the Series 793 simulation software.
Note:
Completing the tasks in this guide requires about 30 minutes.
Series 793 Simulation self-extracting executable
This file installs a simulated version of MTS Series 793 software, including configuration and support files
used with this guide. This software provides simulated real-time control of a test station.
1.2.0 Getting Started Tasks
1.2.1.0 Perform the Checklist to Run in Simulation
Perform the tasks in the following checklist to run the software in simulation and view an example test report.
For More Information
Install the Simulation Software on page 6
Launch the Simulation Software on page 7
Familiarize Yourself with the MTS TestSuite Environment on page 8
Run the Example LCF Test on page 10
View the Example LCF Test Report on page 12
Run More Tests and Explore the Software (Optional) on page 13
Exit the Multipurpose Elite Application on page 14
Exit the Station Manager Application on page 14
1.2.2.0 Install the Simulation Software
Important:
Install the MTS TestSuite application first and then install the MTS Series 793 Simulation software.
Access the installation instructions by clicking the Simulation Help link on the MTS Series 793 Simulation
Software Setup window.
6 MTS TestSuite
1.0 Introduction