Deploying the trolling motor, Adjusting the motor depth, Caution – MotorGuide Wireless User Manual
Page 21

Section 4 - Trolling Motor Operation
90-8M4002601
eng
JUNE 2010
Page 17
2. Raise the motor out of the water and rotate the shaft so that the lower unit is aligned with the mount cradle. Once the motor
is in the stow position, push down on the column to lock the lower unit into the cradle and to lock the release handle.
a -
Mount cradle
b -
Lower unit
Deploying the Trolling Motor
1. Firmly grasp the column with one hand and then pull up on the release handle with the other hand.
a -
Release handle
2. Raise the motor out of the stow position and lower the trolling motor until the depth collar rests on top of the steering housing
collar. Rotate and lock the depth collar into the steering housing collar.
a -
Depth collar
Adjusting the Motor Depth
!
CAUTION
Avoid possible serious injury from dropping the motor when adjusting the motor depth. Firmly grasp the motor shaft with one
hand when raising or lowering the motor.
Adjust the depth of the motor to improve the trolling motor performance in various water depths.
a
b
44733
a
44734
44718
a