MK Diamond Canoga 193 Gas - Manual (Page 7)

7
FUELING SAFETY
193 SERIES CONCRETE MIXER SAFETY
ON
( (
)
)
ON
( (
)
)
ON
( (
)
)
ON
( (
)
)
ON
( (
)
)
ON
( (
)
)
ON
( (
)
)
ON
( (
)
)
ON
( (
)
)
ON
( (
)
)
ON
( (
)
)
ON
( (
)
)
ON
( (
)
)
CAUTION must always be observed while servicing this mixer. Rotating parts can cause
injury if contacted.
This mixer is intended for the production of concrete. Mixer must be used only for its
intended purpose.
This mixer is not suitable for the mixing of flammable or explosive substances.
NEVER operate the mixer in an explosive atmosphere.
Before starting the mixer, check that all guards are in position and correctly fitted.
Keep area around the mixer clear of obstructions and trip hazards which could cause
persons to fall onto moving parts.
ALWAYS ensure mixer is on level ground before mixing.
Become familiar with the controls of the mixer before operating.
Ensure the drum is rotating while filling and emptying the drum.
NEVER disconnect any “emergency or safety devices”. These devices are
intended for operator safety. Disconnection of these devices can cause
severe injury, bodily harm or even death! Disconnection of any of these
devices will void all warranties.
Unauthorized equipment modifications will void all warranties. Manufacturer does not
assume responsibility for any accident due to equipment modifications.
Allow the engine to cool before adding fuel or performing service and maintenance functions.
Contact with hot components can cause serious burns.
ALWAYS refuel in a well-ventilated area, away from sparks and open flames.
ALWAYS use extreme caution when working with flammable liquids. When refueling, stop
the engine and allow it to cool. DO NOT smoke around or near the machine. Fire or explo-
sion could result from fuel vapors, or if fuel is spilled on a hot engine.