MK Diamond MK-MANTA III - Manual (Page 5)

5
MANTA CORE DRILL III SAFETY
• Use the right tool. Do not use a tool or attachment to do a job for which it is not recommended.
Do not alter the tool. Maintain all tools with care for the safest and best performance.
• Should any part of this drill become missing or damaged, or any component fail to perform
properly, shut off the drill and unplug the power source. Replace the missing, damaged, and/ or
failed part before resuming operations.
• NEVER operate this equipment when not feeling well due to fatigue, illness or taking medicine.
• NEVER operate this equipment under the influence of drugs or alcohol.
• Whenever necessary, replace nameplate, operation and safety decals when they be come difficult
to read.
• ALWAYS check the machine for loose bolts and parts before starting.
• ALWAYS wear proper respiratory, head, ear and eye protection
equipment when operating this machine.
• ALWAYS store equipment properly when it is not being used. Equipment should be stored in a
clean, dry location out of the reach of children.
• ALWAYS insure that the switch is off before plugging unit into electrical power.
• NEVER leave the drill running unattended. Turn power off.
• DO NOT over reach, maintain control. Keep proper footing and balance at all times. Maintain a
firm grip.
NEVER touch electrical wires or components while the engine is running. They can be
sources of electrical shock which could cause severe injury or burns.
ELECTRICAL SHOCK
Keep hands, feet, hair, and clothing away from all moving parts to prevent injury. Never
operate the motor with covers, shrouds, or guards removed.
ROTATING PARTS
on
ACCIDENTAL STARTS
Before starting the equipment, be sure the ON/OFF switch is in the “OFF” position to pre-
vent accidental starting. Place the ON/OFF switch in the OFF position before performing
any service operation.