MK Diamond MK-S - Manual (Page 14)

14
MK-S STarT UP
The pre-start inspection should be performed before beginning any job. If Diamond Blade is worn,
replace the blade before starting work.
PrE-STarT inSPEcTion
Inspect Blade for damage. Verify
the Blade is correct for the mate-
rial being cut.
Inspect the MK-S for general
damage and/or loose hardware.
• NEVER lubricate components or attempt service on a running machine.
• Keep the machinery in proper running condition.
• Fix damage to the machine immediately and always replace broken parts, or missing decals.
MainTEnancE SaFETY