MK Diamond PX-3 - Manual (Page 28)

28
PAVER SAW, PX-3 ASSY, FINAL
ITEM
NO.
DESCRIPTION
PART OR
IDENTIFYING
NO.
QTY.
REQ.
A ASSEMBLY, FRAME N/A 1
A1 CASTING, FRAME, RIGHT (COMP) 160246 1
A2 CASTING, FRAME, LEFT (COMP) 160248 1
A3 SUPPORT, HORIZONTAL FRAME 160249 2
A4 TUBE CONNECTOR, 1/4-20 157930 4
A5 SCREW, 1/4-20 X 2” HEX HEAD CAP 158282 4
A6 WASHER, 1/4 SAE FLAT 151915 4
A7 WASHER, 1/4 SPLIT LOCK 152591 4
A8 DRIVE STUD, ROUND HEAD GROOVED #16 (1/4) X 1/2 158071 2
A9 BUMPER W/WASHER, 1.0 (FOOT) 160418 4
A10 SCREW, #8-32 X 1 PAN HEAD PHILLIPS 160446 4
A11 WASHER, #8 SPLIT LOCK 160447 4
A12 NUT, HEX #8-32 153549 4
A13 LABEL, ADHESIVE “PX3” 160419 1
A14 LABEL, PROP 65 WARNING 158322 1
A15 LABEL, EXTENSION CORD WARNING 155672 1
B ASSEMBLY, CUTTING HEAD N/A 1
B1 ASSEMBLY, ARM W/MOTOR & HANDLE 160251 1
B2 WRENCH, BLADE NUT, 14 MM 158406 1
B2A WRENCH, BLADE SHAFT 158110 1
B3 FLANGE, OUTER BLADE (STAMPED) 158105 1
B4 FLANGE, INNER BLADE (TURNED) 158106 1
B5 SCREW, M10-1.5 X 20 MM HEX FLANGE (BLADE RETAINING) 158107 1
B6 CAP, MOTOR 157877 1
B7 CAP, MOTOR FILTER 157878 1
B8 SPACER PIN, CAP SCREW 157879 2
B9 ELEMENT, FILTER 157729 1
B10 SCREW, #8 X 1-1/2,COMBO HEAD PAN, SELF-TAPPING 158157 2
B11 LABEL, SAFETY CAUTION 155576 1
C ASSEMBLY, BLADE GUARD N/A 1
C1 CASTING, BLADE GUARD (COMP) 160258 1
C2 SCREW, M6-1 X 20 MM HEX HEAD CAP 158158 4
C3 WASHER, M6 SPLIT LOCK 158159 4
C4 DECAL, ADHESIVE “PAVER EXTREME” 160420 1
C5 TAG, SERIAL 158096 1
D ASSEMBLY, PIVOT CLAMP N/A 1
D1 CASTING, PIVOT CLAMP (COMP) 160358 1
D2 SCREW, 1/4-20 X 1-1/2 SOCKET HEAD CAP 154683 2
D3 PIN, PIVOT .625 X 5.6 157645 1
PX-3 PAVER EXTREME PARTS LIST