MK Diamond PX-3 - Manual (Page 14)

14
PX-3 PAVER EXTREME PRODUCT SPECIFICATIONS
• The PX-3 is a versatile lightweight, dry, masonry saw
• Engineered as a 14” dry saw, consisting of a powerful 120V motor in a hard plastic
case and a PX-10 cutting blade with a 5-1/2” cutting depth
• Specially designed 14” diameter segmented dry MK Diamond blade with a .110 inch
cutting width
• The PX-3 can cut a variety of masonry types including slump stone block, wall brick,
paver brick, roofing tile, marble, granite, decorative rock, or almost any other non-
ferrous material
• The PX-3 is designed with a lockable trigger-operated switch in the handle to allow
for ease of operation
• Includes a Dust Collector nozzle that can be used to remove dust from the Lower
Case, using your shop vacuum’s 2-1/2 inch diameter hose
• Designed with an easy clean motor air filter to extend the life of the motor
• Replaceable motor brushes to extend operating life
• Pivoting backstop cuts material at any angle
• Motor has built-in thermal overload protection and dynamic brake
PX-3 Paver Saw Specifications
Model 160256
Motor 120V/60 Hz
Amps 13 AMP
Horsepower 1-3/4 HP
Blade RPM 3,500 RPM
Blade Capacity 14" (356 mm)
Arbor Size 1"
Depth of Cut 5-1/2" (14" Blade)
Maximum Depth of Cut 10-3/4" for materials up to 3" thick
Weight 37 lbs.
Saw Dimensions (LxWxH)
- inches/mm 21" x 16" x 18"
527 x 406 x 457 mm