MK Diamond MK-212 - Manual (Page 21)

21
MK-212 SAW OPERATION
90° STRAIGHT EDGE CUTTING
DO NOT FORCE THE TOOL. It will do the job better and safer at the rate for
which it was designed.
CAUTION
(C)
Place the tile against the Back
Stop and Rip Guide. Verify the tile
is seated against the Back Stop
and Rip Guide.
(A)
Position the adjustable Rip Guide to
desired cut length.
(B)
A square should be used to check
alignment of the Back Stop to the
Blade.
(F)
Perform the cut. Turn the motor
OFF when work is complete.
(D)
Turn the motor ON.
(E)
Verify proper cooling flow on both
sides of the blade.