MK Diamond MK-212 - Manual (Page 15)

15
MK-212 SAW ASSEMBLY
ASSEMBLY
Follow the assembly instructions to prepare your MK-212 for operation.
(A)
Loosen the Cutting Head
Locking Knob.
(C)
Obtain the first Leg.
(B)
Move the Cutting Head to one end
of the saw. Tighten the Cutting
Head Locking Knob.
(E)
Tighten the Leg Retaining
Wingnut.
(D)
Lift the end opposite of the cutting
head; align the Leg with the
Retaining Slot on the saw and
install the Leg.
(F)
Repeat Steps C through E for
the second Leg.
(G)
Loosen the Cutting
Head Locking Knob.
Move the Cutting Head
to the end with the two
installed Legs.
SUPPORT LEG INSTALLATION
(I)
Install the remaining to Legs
on the opposite side of the saw
using Steps C through E.
(H)
Tighten the Cutting
Head Locking Knob.
(J)
Install center legs for the
MK-212-6.