MK Diamond MK1070 - Manual (Page 3)

• Take time to read and understand fully the owner’s manual instructions
and all safety labels attached to the saw.
• Use safety goggles and ear protectors that comply with ANSI Z87.1.
Wear a dust mask and protect your hands, face and body with the proper
clothing and safety equipment.
• Keep blade guard in place and in working order at all times.
• Be sure you have the right saw and blade for the work to be done.
Forcing a tool to do a job for which it was not designed invites hazardous
results and failure.
• Keep work area clean and safe to avoid accidents.
• Maintain a “safe zone” and keep all visitors at a safe distance from the
work area.
• Always make sure switch is “off” before plugging unit into electrical
power.
• Never leave saw running unattended. Turn power off.
• Be sure the saw is secure and stable before cutting. Never stand on the
saw or use the saw on an unsupported surface.
• Maintain all tools with care for the safest and best performance.
• Should any part of this saw be missing or damaged, or any component fail
to perform properly, shut off the saw and unplug the power source. Replace
the missing, damaged, and/or failed part before resuming operation.
• Always keep alert. Do not allow familiarity (gained from frequent use) to
cause a careless mistake. Always remember that a careless fraction of a
second is sufficient to inflict severe injury.
• THINK SAFETY The operation of any power tool can result in foreign
objects being thrown into the eyes causing severe damage. Use safety
goggles to comply with ANSI Z87.1.
FORESIGHT IS BETTER THAN NO SIGHT
For your safety!
These safety precautions should be followed at all times. Failure to follow
these safety precautions could result in injury to yourself and others.
Safety is a combination of operator common sense and alertness at all
times when the saw is being used.
For your own safety and protection, do not attempt to operate saw until
it is completely assembled and installed according to the instructions, and
until you read and understand all safety and operating instructions.
GENERAL SAFETY INSTRUCTIONS FOR THE MK-1070 TILE SAW
( (
)
)
on
( (
)
)
on
( (
)
)
on
2
( (
)
)
on