MK Diamond MK-145 220 Volt - Manual (Page 10)

MK Diamond Products Inc. Customer Service Department (800) 421-5830
MK-145 Revision 09/04, Effective date – September 23, 2004 Page 10
SAFETY:
LOCK OUT:
To prevent accidental starting, and to help ensure your
workshop is "Kidproof," this saw is provided with a means
to deactivate the functioning of the motor switch. The
switch is provided with a removable toggle. With the
toggle removed, the switch does not function and the
motor cannot be turned on. Replacing the toggle
reactivates the switch function.
SAFETY LABEL LOCATIONS:
Safety labels are located according to Figure 1 to 3 below. The labels contain important
information. Please read the information contained on each label. These labels are
considered a permanent part of your saw. If a label comes off or becomes hard to read,
contact MK Diamond or your dealer for a replacement
Item Location Description Part No.
1 Switch Side General Safety Warnings 158315
2 Water Basin Water level warning N/A
3 Back Serial Number and Motor
Specifications 158316
TILE SAW SPECIFIC WARNINGS:
• Wear eye protection
• Use splash hood for every operation for which it can be used
• Disconnect saw before servicing, when changing cutting blades, and cleaning
• Use tool only with smooth edge cutting blades free of openings and grooves
• Replace damaged cutting blade before operating
• Do not fill water bath above water fill line
Toggle
Removed
Toggle
Installed
1: General Safety Warning 2: Water Level Warning 3: Serial Number and
Motor Specifications