MK Diamond MK-370 - Manual (Page 12)

12
PRODUCT SPECIFICATIONS
The MK-370 is a versatile Tile Saw. Operated and used according to this manual, the MK-370 will
provide years of dependable service.
GENERAL DESCRIPTION
MOTOR SPECIFICATIONS
BLADE CAPACITY
TILE TYPES
The MK-370 Tile Saw is engineered as a tabletop wet tile saw. The saw includes a powerful 120V
electric motor. The saw is capable of cutting tile up to fourteen (14) inches in length. The saw can
cut an object two (2) inches thick in one pass.
Motor specifications for the MK-370 are listed in the table below.
Voltage 120v
Overall Amperage 7.4 A
Frequency 50/60Hz
RPM 6000 rpm
Horse Power 1-1/4 hp
The MK-370 uses a seven (7) inch (178mm) diameter, wet cutting continuous rim, MK Diamond
blade with a five-eighths (5/8) inch (15.875 mm) arbor.
NOTE: The MK-370 is not designed to cut plastic or metals.
MK-370 SAW PRODUCT SPECIFICATIONS
The MK-370 can cut a variety of tile types including stone, ceramic, slate, granite, marble, porcelain,
and lapidary products.