Metal Sales T10-C - Manual (Page 3)

PV-3
V
erti
-L
ine
S
erieS
© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11
800.406.7387 (Corporate Office) • www.metalsales.us.com
T10-C P
anel
o
verview
T10C PANEL PROFILE
SUBSTRATE
COVERAGE
LENGTH
AVAILABILITY
APPLICATION
FASTENING SYSTEM
FASTENERS
MATERIALS
FINISH
T10C panel is designed to be utilized over open structural framing, but can easily be used with a solid substrate.
The recommended substrate is 5 /
8
" plywood with a 30 pound felt moisture barrier. To avoid panel distortion, use
a properly aligned and uniform substructure.
Each panel has a coverage of 30".
Commercial, Industrial panels.
Direct Fastened (exposed).
The fastener selection guide should be consulted for choosing proper fasteners for specific applications.
Quantity and type of fastener must meet necessary loading and code requirements (see PGI-12-14).
Steel grade 50, per ASTM A-792. Optional material: stainless steel, weathering steel, copper, and aluminum.
C
30" Coverage
5 /
8
"
1 1 /
2
"
6" Pitch
1 1 /
4
"
4 3 /
4
"
 * Acrylic Coated Galvalume ® (ACG) / ASTM A-792 - AZ55  Multi-Pass Kynar
 Prepainted Galvalume / ASTM A-792 - AZ50  Marbilique
 MS Colorfast45 ®  Plastisol
 ** Fluorocarbon (PVDF)  Polyester
* Differential appearance of Acrylic Coated Galvalume roofing materials is not a cause for rejection.
** Meets both Kynar 500 and Hylar 5000 specifications.
Lengths under 5'-0" are available with some cutting restrictions. Please consult your Metal Sales branch for
maximum panel lengths and recommendations (see PGI-2 and PGI-3 for locations).
Panels are available in 24 through 18 gauge. Minimum quantities may apply.
Custom capabilities include:
-Perforated panels for wind screens and liner panels.
-Depth of panel.