MBT Lighting CA1612 - Manual (Page 8)

Copy a Bank to a Chase
1.)Press and hold the Program Button for three seconds to enter the
programming mode.
2.)Select the bank of scenes you wish to copy.
3.)Select the chase to which you want to copy the bank of scenes.
4.)Press
,an d simultaneously.The scenes Music/Bank-Cop y MIDI/Add
of the bank are copied to the Chase.
5.)Press and hold the Program Button for three seconds to exit programming
mode.
EDITTING CHASES
Adding a Step to a Chase
1.) Press and hold Program Button for three seconds to enter the programming
mode.
2.)Select the chase1~6 to which you wish to add a step.
3.)Pres s and the LCD shows the scene and bank.This TAPSYNC/Display
is the bank containing the scene you wish to add.
4.)Pres s again and the LCD shows the Chase that you TAPSYNC/Display
have selected.
5.)Use th e buttons to scroll through the chase to reach the Up and Down
step after which you wish to add a step.
6.)Pres s , the LCD will read one step number higher. MIDI/Add
7.)Press th e button you wish to add. Scene
8.)Pres s again to add new step. MIDI/Add
9.)Press and hold the Program Button for three seconds to exit the programming
mode.
Deletin g a Step in a Chase
1.)Press and hold th e Button for three seconds to enter the Program
programming mode.
2.)Select the 1 to 6from which you wish to delete a step. Chase
3.)Pres s and the LCD shows the Chase that you have TAPSYNC/Display
selected.
4.)Use th e button s to scroll through the chase to reach the step Up/Down
you wish to delete.
5.)Pres s and the scene will be deleted. Auto/Del
6.)Press and hold the Program button for three seconds to exit the
programming mode.