MBT Lighting CA1612 - Manual (Page 7)

Erase All Scenes
This will erase all scenes in all banks.All scenes are reset to 0.
1.)Press and hold dow n
an d Down buttons while turning Program Bank
power off.
2.)Re-connect the power,all scenes should be erased!
Copy Bank
Thi s function enables you to copy the settings of one bank to another bank.
1.)Press and hold th e
Button for three seconds to activate the Program
programming mode.
2.)Select the bank you want to copy.
C.)Press an d release th e
button. MIDI/Add
D.)Select the ban k into which you want to copy to.
F.)press th e
button. The LCD display will flash shortly Music/Bank-Copy
to indicate the copy has been finished.
Delete A Bank
1.)Press and hold th e Button fo r three seconds to activate the Program
programming mode.
2.)Select the bank to be deleted.Press the and Auto/Del Music/Bank-
Copy at the same time to delete the Bank.The LCD will flash to indicate
th e function completion.
You have to program scenes before you can program chases.
1.)Press and hold the Button for 3seconds to enter programming Program
Mode.
2.)Choose any chase(1~6)to be programmed.
3.)Select the desired Scene from any bank.Scenes are run in the order
That they are programmed into the chase.
4.)Press the button,all the LED will flash 3 times. MIDI/Add
5.)Repeat steps 3 and 4 as many as you want.You can record up to 240
Scenes into one chase.
6.)Press and hold the program Button for 3 seconds to exit programming
Mode.
Chase Programming