Mayline CSII Privacy Panels - Manual (Page 5)

(5)
FOUR Direction Connection :
1. REFER TO BASIC PANEL ASSEMBLY INSTRUCTIONS ON PAGE 1.
2. Place one assembled Panel with Base Posts - Single or Stacked - along the edge of ONE Work Surface at the desired
corner. Place the second assembled Panel at 90° to the first panel and insert the Inner Corner filler strip from the FOUR
Direction Finishing Kit to maintain configuration. Attach these assembled Panels to the Work Surface edge using two
Screws (E2) per Base Post by driving screws through edge banding. Attach each Base Post to the Work Surface face
with one Screw (E2) per Post. Use 'CAUTION' when installing screw into the Work Surface laminate to prevent marring
the finish.
3. Using the appropriate Finishing Kit Components, extend the Panels to the desired length in each direction at this time
attaching each additional panel to the Work Surface as described in Step 1. Insert Caps to complete each connection.
4. Move the Adjacent Work Surface into position.
5. Connect the third panel assembly to the existing 90° corner assembly from Step 2 using the one Inn er Corner filler
strip. Attach this Panel to the Work Surface edge as described in Step 1.
6. Using the appropriate Finishing Kit Components, extend the Panels to the desired length. Attach these additional
Panels to the Work Surface as described in Step 1. Insert Caps to complete each connection.
7. Move the Third Work Surface into position.
8. Connect the fourth panel assembly to the existing 'T' corner assembly from Step 4 using the remaining two Inner
Corner filler strips. Attach this Panel to the Work Surface edge as described in Step 1.
9. Using the appropriate Finishing Kit Components, extend the Panels to the desired length in each direction. Attach
these additional Panels to the Work Surface as described in Step 1. Insert Caps to complete each connection.
10. Move the Final Work Surface into position if required.
NOTE:
When ordering components, specific
color and/or size information is required.
Contact a Mayline Customer Service
Representative. 1-800-822-8037
CATALOG No:
C9411
C9412
C9413
Step 5 Step 2
Step 8
'INNER'
Corner Strip
'INNER'
Corner Strip